Precomputed result
The five-unit network of the IIT 4.0 paper in state ABcde specifies 23 distinctions with different purviews
| Substrate | The Fig 7 network (see iit:result/albantakis-2023-fig7a-active) in a different state: unit E is OFF instead of ON. PyPhi ships the substrate, with the weights supplied by the authors, as pyphi.examples.iit4_2023_fig7_substrate. |
| State | (1, 1, −1, −1, −1) — ABcde, units A, B ON |
| φs | 0.24902638133897767 |
| Minimum partition | A directed partition severing 14 of the 25 connections; the script lists them. The same under both formulations. |
| Formalism | iit-4.0-2026 |
| PyPhi | 2.0.0rc4 |
| Script | albantakis-2023-fig7b-inactive.py |
Albantakis et al. (2023) turn unit E from ON to OFF to show that an inactive unit still contributes to the Φ-structure: the number of distinctions stays the same, but their purviews and φd change, and so do the relations.
| quantity | Fig 7B | 2023 | 2026 |
|---|---|---|---|
| complex | ABcde | ABcde | ABcde |
| φs | 1.31 | 1.3133 | 0.2490 |
| distinctions | 23 of 31 | 23 | 23 |
| relations | 13111 | 13498 | 13498 |
| Φ | 18.55 | 19.3169 | 19.3169 |
The relation counts and Φ differ from the figure because of a tie, described below. The distinctions match the figure's list in mechanism, purviews, states, and φd to four decimals (for example Bc → c | aB with φd = 0.0234 and Bcde → c | a with 0.0020), except that the cause purview of cde is b where the figure lists c. Σφd = 4.5395 and Σφr = 14.7774.
The cause purview of the mechanism cde is tied: the readings b and c, both in state −1, give the same φd = 0.0132 and are both congruent with the system's specified cause state. The two readings give different Φ-structures, because the cause purview determines which other distinctions cde overlaps.
| resolution of the cde tie | cause purview | relations | Σφr | Φ |
|---|---|---|---|---|
| maximal Φ (S1 Text) | b | 13498 | 14.7774 | 19.3169 |
| figure | c | 13111 | 14.0170 | 18.5565 |
S1 Text of the paper ("Resolving ties in the IIT algorithm") states that ties in the cause or effect of a distinction "may be resolved at the level of the cause–effect structure, by selecting the z*c/e that maximizes the system's structure integrated information Φ". The reading b does that, and it is the one PyPhi 2.0 selects, so the canon reports it. The figure's values come from the reading c; PyPhi attributes them to the enumeration order of the 2023 code. The script substitutes c and prints that result as well, which reproduces the figure's relation count and Φ (the figure truncates Φ to 18.55).
The paper states that in panel B "φs changes only slightly" and that Φ is lower than in panel A. Under the 2023 formulation φs rises from 1.11 to 1.31; under the current formulation it falls from 0.48 to 0.25. Φ is lower than in panel A (22.27) under either resolution of the tie.
The script uses the default configuration of each formulation. To reproduce, run the script with uv, which installs PyPhi 2.0.0rc4 for the run:
uv run --with "pyphi==2.0.0rc4" python canon/albantakis-2023-fig7b-inactive.py
Sources
- Albantakis et al. (2023). Integrated information theory (IIT) 4.0: Formulating the properties of phenomenal existence in physical terms. PLOS Computational Biology. https://doi.org/10.1371/journal.pcbi.1011465 — Fig 7B and its caption; Results and discussion, "Consciousness and activity: Active, inactive, and inactivated units"; S1 Text, "Resolving ties in the IIT algorithm" (iit:ref/albantakis-2023b)