IIT Expert

Precomputed result

The three-unit substrate of the IIT 4.0 paper condenses into the complexes C and aB

Substrate Three binary units A, B, C with states in {−1, 1}. Each unit is a logistic of its weighted inputs (Eq 60) with slope k = 4. The weights, read from the Fig 1A causal model, are A→A −0.2, A→B 0.7, A→C 0.2, B→A 0.7, B→B −0.2, C→B −0.8, C→C 0.2; there is no B→C or C→A connection. PyPhi ships the substrate as pyphi.examples.iit4_2023_fig1a_substrate.
State (−1, 1, 1) — aBC, units B and C ON
φs 0.21221955291860525
Minimum partition For the first complex C, the cut of its self-connection C→C. For the second complex aB, the directed bipartition cutting A→B. The same under both formulations.
Formalism iit-4.0-2026
PyPhi 2.0.0rc4
Script albantakis-2023-fig1-triad.py

Albantakis et al. (2023) introduce the postulates of existence, intrinsicality, information, integration, and exclusion on a three-unit substrate in state aBC (Fig 1). Fig 1E reports φs for four candidate systems and marks aB and C as complexes. The script computes φs for all seven candidate systems and runs the recursive exclusion search (Eqs 24–25) under both formulations.

candidate φs, Fig 1E iit-4.0-2023 iit-4.0-2026
C 0.21 0.2122 0.2122
aB 0.17 0.1719 0.0405
aBC 0.13 0.1339 0.1339
a 0.04 0.0396 0.0389
B — 0.0032 0.0016
aC, BC — 0 0

Under both formulations C has the highest φs, so C is the first complex. C excludes every candidate that overlaps it: aBC, aC, and BC. Among the remaining candidates aB, a, and B, aB has the highest φs, so aB is the second complex. The exclusion order is the same under both formulations.

The caption of Fig 1E justifies aB as a complex because its φs "is higher than that of all other overlapping systems (for example, subset a with φs = 0.04 and superset aBC with φs = 0.13)". Under the 2023 formulation this comparison holds. Under the current formulation it does not hold as written: aBC (0.13) exceeds aB (0.04). aB is a complex because C, which does not overlap aB, excludes aBC first. aB then exceeds a by a small margin (0.0405 against 0.0389). Fig 1E also marks C as a complex with φs = 0.21, which matches the computed value.

The difference in φs(aB) comes from the intrinsic information requirement of Mayner et al. (2026). The current formulation sets φs = min{φc, φe, ii}, where ii is the minimum over cause and effect of intrinsic differentiation and intrinsic specification (§2.3–2.4); the 2023 formulation sets φs = min{φc, φe}. The script prints each term for the two complexes.

term aB, Fig 1C–D aB, computed C, computed
intrinsic specification, cause (Fig 1C: ii_c) 0.84 0.8432 0.2122
intrinsic specification, effect (Fig 1C: ii_e) 1.1 1.0976 0.2911
intrinsic differentiation, cause — 0.6640 0.6638
intrinsic differentiation, effect — 0.0405 1.0000
φc 0.24 0.2446 0.2122
φe 0.17 0.1719 0.2911
φs, 2023 0.17 0.1719 0.2122
φs, 2026 — 0.0405 0.2122

In the 2023 formulation, intrinsic information is what the current formulation calls intrinsic specification, so the Fig 1C values ii_c = 0.84 and ii_e = 1.1 correspond to the intrinsic specification rows. Intrinsic differentiation is new in the current formulation and has no counterpart in the figure. φc and φe are the same under both formulations and match Fig 1D. For aB, the specified effect state Ab has probability 0.9723, so the effect side's intrinsic differentiation, −log₂ 0.9723 = 0.0405, is the minimum of all terms. For C, the minimum is φc = 0.2122 under both formulations, so its φs does not change.

The script uses the default configuration of each formulation, applied with PyPhi's IIT_4_0_2026 and IIT_4_0_2023 presets. PyPhi codes the state −1 as 0. To reproduce, run the script with uv, which installs PyPhi 2.0.0rc4 for the run:

uv run --with "pyphi==2.0.0rc4" python canon/albantakis-2023-fig1-triad.py

Sources